| X1020(100kHz)低頻窄帶探頭 |
 |
價格：1 元(人民幣) | 產地：美國 |
| 最少起訂量：1臺 | 發貨地：上海 | |
| 上架時間：2017-07-30 15:06:44 | 瀏覽量：174 | |
上海楹點檢測設備有限公司
 |
||
| 經營模式：代理商 | 公司類型：私營合伙企業 | |
| 所屬行業：無損檢測儀器 | 主要客戶：工廠 | |
 在線咨詢  |
||
| 聯系人:謝美花 (小姐) | 手機:15121077168 |
電話: |
傳真: |
| 郵箱:2639790836@qq.com | 地址:上海市寶山區滬太路6397號1-2層F25區1011室 |
|
X1020(100kHz)低頻窄帶探頭 X1020(100kHz)低頻窄帶探頭|奧林巴斯X1020(100kHz)低頻窄帶探頭|X1020探頭|X1020
上海楹點檢測設備有限公司全國熱銷平臺 原廠正品 質量保證 具體價格來電索取
手機：15121077168/QQ:3436884616
上海楹點檢測銷售區域：北京、上海、河北、天津、沈陽、成都、重慶、武漢、廣州、珠海、廈門、濟南、江浙滬、等等，來電咨詢詳情：
本著“為顧客提供最滿意的產品和服務”的經營宗旨，上海楹點檢測設備有限公司鄭重承諾：在確保設備的先進性、可靠性、穩定性的同時，不斷改進服務質量，從售中到售后的交貨、調試開通、設備維護管理、技術服務、用戶技術培訓等各方面，保證顧客能得到最好的服務，讓顧客滿意、放心。
特殊探頭
低頻窄帶探頭
這種探頭在對混凝土、木材、地質學樣件等材料進行檢測時，成對使用于穿透法 應用中。這些探頭有以下頻率規格：50kHz(X1021)、100 kHz(X1020)、180 kHz (X1019)。建議使用高電壓脈沖發生器接收器，如：型號為5058PR或5077PR 的方波脈沖發生器。
組合縱波/橫波模式探頭
這些探頭可在單晶、雙晶或三晶排列中同時生成縱波和橫波。它們可以根據不同 的頻率和晶片尺寸被定制設計。
500•kHz寬帶/高阻尼探頭
這種高阻尼探頭用于測量纖維玻璃、復合材料及其它衰減材料的厚度。這種探頭在 探測較厚或粗面鑄鐵材料的缺陷時，還可以與NWC-302尼龍防磨帽一起使用。 工件編號為M2008，直徑為1.5英寸或38毫米。
可變角度聲束楔塊
用戶使用可變角度聲束楔塊，可以在0°到50°的范圍內調整入射角，以在鋼材料中生成0°到90°之間的折射角。楔塊與0.50 x 1.00英寸的標準角度聲束探頭一起使用（參閱第12頁）。
楔塊工件編號為ABWX-2001。
持續高溫延遲塊探頭
這種探頭可以持續耐受高達175°C（350°F）的溫度及高達85 PSIG的壓力。一個典型的應用是監控壓熱器中材料的固化程度。
工件編號為X2002（2.25 MHz，0.5英寸或13毫米直徑）。
電磁聲學探頭（EMAT ）
電磁聲學探頭是利用磁致伸縮效應發射和接收聲波的單晶探頭。
其工件編號為E110-SB。
優勢
• 無需去除外部銹蝕層。
• 無需耦合劑。
• 檢測時可以接觸被測材料的表面*，也可以與被測材料的表面保持很小的距離。
應用
• 外部氧化層表面。
• 與37DL PLUS**或38DL PLUS**測厚儀、EPOCH LT**、EPOCH 4 Plus、
EPOCH XT、EPOCH LTC、EPOCH 600或EPOCH 1000探傷儀一起使用。
* 溫度限定標準：持續接觸為0°C～60°C（32° F～140° F），間歇接觸的最高溫度為80°C（176°F）。間歇接觸被定義為10秒鐘接
觸工件，60秒鐘進行冷卻。
**需要適配器。適配器需單獨訂購。工件編號為1/2XA/E110。
Roller transducers are used in testing metallic or non-metallic materials for bonding/segregation in CFRP/GRP including Kevlar®, rubber friction materials, and high density products such as glass, and metallic and plastic weldments. This series includes roller and contact type transducers at 0.5 MHz and 1.25 MHz. Contact units are available in 5, 10, and 15 mm diameters, while the roller transducers incorporate a 5 mm crystal giving a 10 mm footprint through the replaceable tire. Both styles are fitted with axial mounted Microdot connectors (other connectors available on request). The roller transducer can be ordered with either a single or dual yoke design.
Roller transducers are used in testing metallic or non-metallic materials for bonding/segregation in CFRP/GRP including Kevlar®, rubber friction materials, and high density products such as glass, and metallic and plastic weldments. This series includes roller and contact type transducers at 0.5 MHz and 1.25 MHz. Contact units are available in 5, 10, and 15 mm diameters, while the roller transducers incorporate a 5 mm crystal giving a 10 mm footprint through the replaceable tire. Both styles are fitted with axial mounted Microdot connectors (other connectors available on request). The roller transducer can be ordered with either a single or dual yoke design.
Roller transducers are used in through transmission mode for fast linear scans of parts without the need for an immersion setup. Roller transducers are typically used in applications looking for de-laminations in multilayer materials and are available in either single or dual yoke designs feature a removable and replaceable tire.
聚合物 (PVDF)
Polymer (PVDF) Immersion Transducers
High frequency polymer (PVDF) transducers are focused immersion transducers with very broad bandwidth, whose element provides an excellent impedance match to water that results in a better transfer of sound energy. These transducers also eliminate the need for the fused silica delay lines typically found in high frequency immersion transducers, removing the echo multiples associated with delay lines. Note: Polymer transducer center frequencies are based on the film thickness of the polymer film element. Performance is highly dependent on pulser and cable characteristics and effective center frequency may be 15 - 25% lower than the nominal value.
Note: Please replace X.XX" with the standard focal length of your choice.
高溫&低頻• Due to the fact that polymer transducers are inherently broadband, their center frequency may be lower than the frequency indicated on the transducer 
Continuous High Temperature
Delay Line Transducer
This transducer can continuously withstand temperatures as high as 350°F (175°C) and pressures up to 85 PSIG. One typical application is to monitor the cure of materials in autoclave.
Part number is X2002, (2.25 MHz, 0.5 inch, 13 mm diameter)
Low Frequency Narrowband Transducers
Meant for use in pairs for through transmission in materials such as concrete, wood, and geological samples, these are available in frequencies of 50 kHz (X1021), 100 kHz (X1020), and 180 kHz (X1019). Recommended instruments are high voltage pulser-receivers such as the Model 5058PR or 5077PR Square Wave Pulser.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 版權聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責。機電之家對此不承擔任何責任。 友情提醒：為規避購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。 |
機電之家網 - 機電行業權威網絡宣傳媒體
關于我們 | 聯系我們 | 廣告合作 | 付款方式 | 使用幫助 | 會員助手 | 免費鏈接Copyright 2026 jdzj.com All Rights Reserved??技術支持：機電之家 服務熱線：0571-87774297
網站經營許可證:浙B2-20080178
