| 霍尼韋爾氣體探測器 CM4有毒氣體偵測器 |
 |
價格：1 元(人民幣) | 產地：美國 |
| 最少起訂量：1個 | 發貨地：上海 | |
| 上架時間：2018-07-01 21:23:49 | 瀏覽量：2329 | |
上海宛暢實業有限公司
 |
||
| 經營模式：進出口商 | 公司類型：私營有限責任公司 | |
| 所屬行業：其他 | 主要客戶：石油 化工 電力 核工業 半導體 | |
 在線咨詢  |
||
| 聯系人:陳經理 (小姐) | 手機:15021261413 |
電話: |
傳真: |
| 郵箱:chenjing@parts4automation.com | 地址:上海市松江區廣富林路4855弄11號樓1樓 |
|
CM4有毒氣體偵測器 CM4 4點系統
經濟高效的低維護成本4點探測器，連續有毒氣體監控，采用Chemcassette技術實現PPB級別探測 CM4有毒氣體探測器，無干擾，運行維護成本低，適于半導體、制藥和化學工業。 就半導體、制藥和化學工業而言，CM4氣體探測器采用了最先進的化學紙帶技術，具有無干擾、低運行維護成本的特點。 CM4的1/4采樣管可輕松布置在制程區域，排氣管道，氣柜等應用場合。 各種標準信號輸出使得CM4具有高度的靈活性。可以快速兼容接入現有的報警控制系統。 可選的機架安裝外殼豐富了產品應用范圍，提供了便捷的防護能力。 該儀器能探測同一族內（烷類、無機酸等等）的25余種氣體。
?
? CM4毒氣體偵測器 Honeywell CM4 Toxic Gas Monitor Honeywell Analytics CM4 Continuous Multipoint Monitor The Honeywell Analytics CM4 is a hazardous gas monitor for continuous monitoring at 4 points. This unit is supplied with different options, as table top, wall mount or a rack mount configuration (selections). Over 30 gas calibrations are available with the CM4. ? Features & Benefits ??Total surveillance at all times ??Easy installation into virtually all annunciation and shutdown systems ??Physical evidence of events Quick Specs ??Chemcassette? Technology ??Analog and Serial Outputs ??300' (90m) Sampling Distance ??LonWorks? Interface Available ? Ordering Information ? Model CM4 Monitor Base Unit ? 1874-1000 For 100/120 VAC, 50/60 Hz operation 1874-1002 For 220/240 VAC, 50/60 Hz operation ? Model CM4-P Pyrolyzing Gas Monitor For NF3 Base Unit
1874-0000 100/110 VAC version 1874-0002 230 VAC version ? Installation Kit 874008 Includes sample and exhaust tubing, technical handbook, and installation drawings/instructions ? Configuration Kit 1874-0091 Table mount kit: Includes Input/Output module, table ribbon cable assembly, table I/O module cover, rubber feet, label kit, I/O insulator, and hardware package 1874-0093 Wall mount kit: Includes wall mounting brackets, Input/Output module, ribbon cable assemblies, I/O module cover, rubber feet, label kit, I/O insulator and hardware package 1874-0197 Rack Mount Kit ?A? : For a new CM4 (only) to be added first revision enclosure (original System 16 style) in the field. Includes I/O module and bracket for rack mounting, ribbon cable assembly, tubing, manifold, serial pcb cover, label kit, I/O insulator label, slide/bracket assemblies and hardware package 1874-0095 Rack mount Kit "B": For a new CM4/CM4-P ordered concurrently with a rack enclosure (Schroff version). Includes all configuration changes required to permit quick installation of a new CM4 unit into a new MDA rack. I/O module is installed in CM4 enclosure, all slides are installed on units 1874-0149 Rack Mount Kit ?C? : For a new CM4/CM4-P rack mount version to be field installed into a previously purchased Schroff enclosure. I/O module wrapped separately for attachment to rear panel of enclosure prior to installation of unit. Slides supplied with enclosure system ? Power Cords ? 874333 North America (120VAC) 1874-0112 Japan (100VAC) 874558 Great Britain 874561 Europe 874557 Australia 874560 Switzerland 874559 Denmark ? Calibration ? 1971-0009 Ammonia (II)/ Amines, DMA, TDMAT 1971-0206 Ammonia - Extended Play **** 1971-0269 Ammonia XP4, DMA, TDMAT 1971-0021 Chlorine III** (Chlorine, Nitrogen Dioxide) 1971-0171 Chlorine - Extended Play 1971-0267 Chlorine XP4 1971-0030 Chlorine Dioxide 1971-0141 Fluorine, Chlorine MVIP2025-C Hydrazine (UDMH) 1971-0164 Hydrazine (N2H4) 874032 Hydrides (Arsine [Std], Arsine [Dry], Diborane, Hydrogen Selenide, Hydrogen Sulphide, Phosphine, Silane, Tertiary Butyl Arsine) 1971-0104 Hydrides - Extended Play* (Arsine, [Std], Diborane, Phosphine, Silane) 1971-0265 Hydrides XP4 (Arsine, [Std], Diborane, Phosphine, Silane, Hydrogen Selenide, Hydrogen Sulphide, Hydrogen Sulphide Low Level, Hydrogen Sulphide Dry, Tertiary Butyl Arsine, Tertiary Butyl Phosphine) 1971-0105 Hydrides Extended Play* (Arsine [Low Level] only, Germane) 1971-0266 Hydrides XP4 (Arsine [Low Level] only, Germane) 1971-0010 Hydrogen Cyanide 1971-0014 Hydrogen Sulphide 1971-0020 Hydrogen Sulphide (Low Level) 1971-0016 Phosgene 1971-0120 Phosgene - Extended Play*** 1971-0270 Phosgene XP4, Phosgene High Level 874038 Mineral Acids (Hydrogen Bromide, Hydrogen Chloride, Hydrogen Fluoride, Hydrogen Iodide)** 1971-0032 Mineral Acids (Low Levels) Hydrogen Bromide, Hydrogen Chloride, Boron Trifluoride 1971-0214 Mineral Acids XP (Boron Trifluoride, Hydrogen Bromide [std and low level], Hydrogen Chloride, Hydrogen Cyanide, Hydrogen Fluoride [std and low level], Nitrogen Trifluoride) 1971-0253 Mineral Acids XP Low Level HF calibration. May require export license from the US Department of Commerce - See bulletin 6023. 1971-0272 Mineral Acids XP4 (4 month) (Boron Trifluoride, Hydrogen Bromide [std and low level], Hydrogen Chloride, Hydrogen Cyanide, Hydrogen Fluoride [std only], Nitrogen Trifluoride) 1971-0268 Mineral Acids XP4 (4 month), includes Hydrogen Fluoride Low Level. May require export license from the US Department of Commerce - See bulletin 6023. 1971-0217 Nitrogen Triflouride XP (CM4-P only) 1971-0271 Nitrogen Trifluoride XP4 (CM4-P only) 1971-0040 Nitrogen Trifluoride (CM4-P only) 1971-0260 Sulphur Dioxide MVIP2149-C Triethyl Amine ? * Requires special XP Hydrides Chemcassette 1874-9300. Order separately. ** Points monitoring corrosive or mineral acid gases in dusty or outdoor locations (< Class 10,000 clean room) should use end of line dust filters fitted with Teflon membranes. See Technical Note 1998-0080 for further information. *** Requires special XP Phosgene Chemcassette 1874-9307. Order separately. **** Requires special XP Ammonia Chemcassette 1874-9309. Order separately. ? Alarm Level Settings ? 1874-0330 1 x TLV and 2 x TLV (A2) are standard alarm settings. However, 1/2 x TLV (A1) and 1 x TLV (A2) can be factory preset. Order if required Seven (7) Unit Enclosure for CM4 1874-0050 Seven (7) Unit Enclosure for CM4: 100- 120VAC 1874-0054 Factory installed kit for 230VAC operation (for European systems) ? Five (5) Unit Plus Printer Enclosure for CM4 ? 1874-0051 Five (5) unit plus printer enclosure for CM4: 120VAC 1874-0052 Factory installed kit for 100VAC operation 1874-0053 Factory installed kit for 230VAC operation ? General ? 1874-0056 Blanking panels for enclosure positions without monitors or printer installed 1874K0350 Rack wiring kit for 7 LonWorks CM4s (for use w/Schroff enclosure) 1874-0194 Caster option (permits Schroff enclosure to be moved for cleaning or maintenance purposes. Factory installation highly recommended ? Special Configuration Options ? 874018 Duty cycle option: Allows selection of time period before next window advance. Reduces tape consumption 874016 Remote alarm reset contact 874010 Sample line isolation valve (per point) ? 4-20 mA Outputs 1874A0304 4-20mA option for ?new? style unit (w/IRDA port) (Single card [1 per CM4] with 4 isolated channels, cannot be used for CM4-P) 1874-0335 4-20mA non-isolated for CM4 units (Rev 8 and under) and CM4-P units (all Revs) (choose this 4-20mA option carefully. Installation guidelines, found in the CM4 technical handbook, must be followed exactly, to prevent electrical noise from entering the instruments. [4 per CM4 needed] ? Serial Communications Interfaces 874021-R RS232 for serial printer or remote unidirectional interface (50 ft normal distance, cable dependent) 874022-R RS232 for bidirectional remote communication 874023-R RS422 for serial printer or remote unidirectional interface 874024-R RS422 for remote bidirectional communication 874327-R RS485 for remote bidirectional communication 1874-0332 LonWorks interface option (only with new units) 1874-0344 LonWorks interface option (retrofit) 1874A0355 LonWorks wiring needed for above LonWorks options, if used in non-rack mount applications 1998-0272 LonWorks network considerations Tech Note ? Option, Printer PCB Configuration for Printer Share Box ? 1874-0323 Single printer configuration 1874-0324 Printer share box configuration ? Sample Tubing 102628 Tubing, FEP Teflon 0.190" I.D. x 0.250" O.D - 400 ft roll (121m) Alternate tubing for Vertex samples lines. Used with Vertex M where longer sample line length for multiple analysers are required. Consult the transport time chart in the Vertex Technical Handbook for additional information 0235-0109 Tubing, FEP Teflon 0.190" I.D.-1000 ft roll (304m) 1283K1090 Duct adaptor for 1/4" O.D. tubing for 4-26" round ducts ? Field Upgrade Kits 1874-0090 Table mount field kit (includes table ribbon cable assembly, table I/O module cover, rubber feet, label kit, and hardware package) 1874-0092 Wall mount field kit (includes wall mounting brackets, ribbon cable assembly, I/O module cover, label kit and hardware package) 1874-0094 Rack mount conversion kit (includes all parts and instructions necessary to change a previously purchased wall or table mount unit to a Schroff rack mount unit) 874550 Additional rack mounting kit for earlier (System 16) style MDA enclosure (includes slide/bracket assemblies, I/O module mounting bracket assembly, installation drawing and hardware) 0270-0001 Rack mounting slides for non-Honeywell Analytics 19" racks MVIP3251 Enclosure printer kit for customer installation into Schroff enclosure purchased previously ? Required for above listed printer field conversion kit or for separate field installed printer 1874-0007 Printer share box kit (6 position) 110VAC includes (qty. 6) 10 ft cables 1874-0008 Printer share box kit (6 position) 230VAC includes (qty. 6) 10 ft cables 1874-0010 Printer share box kit (11 position) 110VAC includes (qty. 11) 10 ft cables 1874-0011 Printer share box kit (11 position) 230VAC includes (qty. 11) 10 ft cables ? Spare cables for printer share box to CM4 connection (DB25 to DB9) 1874-0031 50 ft (15 m) cable 1874-0033 10 ft (3 m) cable ? Printers ? 874012 Okidata desktop printer option, 24 pin, dot matrix - non-rack mount, serial input Includes 10 ft cable 110/115 VAC ? Accessories 874264 Optics verification card 971305 Technical Handbook - English 1998M0043 Technical Handbook - Clean Room 1998M0086 Technical Handbook - French 1998M0119 Technical Handbook - German 1998-0151 CM4-P Supplement 1998-0002 CM4/CM4-P Quick Reference Card 1991-0002 Quick Reference Card holder ? Consumables 1991-0063 Rack Mount Printer Paper 0185-0022 Printer Ribbon (Perifics) 0185-0029 Replacement Ribbon Cartridge (Okidata) 874212 Chemcassette Carrier (w/o Chemcassette) 780248 End of Line Particulate Filter. For use as End of Line filter for Non-Corrosive gases 1991-0147 End of Line Particulate Filter for Corrosive Gases, Disposable. This disposable filter provides protection against particulate build up in the sample line when monitoring for Corrosive Gases 1830-0055 End of Line Particulate Filter for Corrosive Gases, Reusable. This reusable filter housing provides protection against particulate build up in the sample line when monitoring for Corrosive Gases. Replaceable filter element (P/N 0235-1072) purchased separately. 0235-1114 Dust Filter for Schroff Enclosure 0235-1072 Replacement "Corrosive" Filter Elements (pk 100). For use in 1830-0055 filter housing 1874-0139 Freon Filter for CM4-P (pk of 4) 1295K0497 H2S in line Scrubber Filter (1 per individual inlet line). Up to 3 months use 874553 Blanking Panel for earlier style MDA enclosure 0235-1159 Pump Diaphragm (HYPALON), 60 Hz 0235-1108 Pump Repair Kit (HYPALON), 60 Hz 0235-0095 Union Fitting ? 上海宛暢實業有限公司是一家自動化設備及工業零部件的專業供應商.公司成立于2012年,專注于為石油,化工,電力,鋼鐵,制藥,環保等領域終端用戶提供工程配套自動化設備及工控備件. 公司依托國內外一批成熟大客戶:中海油渤海鉆井平臺,山東瑞星化工,河北沙河電廠,PAKISTAN NATIONAL REFINERY LIMITED,Petro Oil Supply SDN BHD,THUSO MOLOSIWA BOTSWANA POWER CORPORATION,巴西PAMPA1X345MW燃煤電站等,擁有一批非常優勢的品牌資源. 主營：Honeywell霍尼韋爾氣體探測，Micro Motion艾默生高準質量流量計，羅斯蒙特變送器，霍尼韋爾控制系統與集成,燃燒控制產品,環境自控,閥門執行器、開關等。 #上海宛暢實業有限公司#專業銷售歐美日韓進口的工控產品、儀器儀表等工控備件！ 原裝進口、型號全、價格優，歡迎詢價！ 聯系電話：021-37824198 / 17740803693 QQ：1093845670/1016549297 專業為您選型。 官網：http://www.parts4automation.com/cn |
| 版權聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責。機電之家對此不承擔任何責任。 友情提醒：為規避購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。 |
