Technical details
Connection G1/2, Namur
Nominal size 14 mm
Temperature range -10°C ... +70°C
Medium Filtered, oil-free and dried compressed air according to ISO
8573-1:2010, Class 7:2:4, instrument air, free of aggressive
additives. Alternatively the pressure dew point must be at
least 10°C below lowest occurring ambient temperature.
Materials Body: Al (anodized), plastic, seals: NBR and POM, inner
parts: Al, steel rostfrei and brass
Protection IP 65 according to EN 60529
5/2- way-valves
14 4 2
5 1 3
14 4 2
5 1 3
MN-22-510-HN-xxx
5/2-way, single solenoid, air spring
return
MN-22-511-HN-xxx
5/2-way, single solenoid, mechanical
spring return
Electrical options
Nominal voltage Power consumption Specifics Plug connection*1 -xxx
12 V DC 4.2 W Form B industrial norm -411
12 V DC 2.2 W max. 8 bar Form B industrial norm -431
24 V DC 4.2 W Form B industrial norm -412
24 V DC 4.2 W M 12 -O12
24 V DC 2.2 W max. 8 bar Form B industrial norm -432
24 V DC 2.5 W max. 8 bar M 12 -O32
24 V AC 7/4 VA Form B industrial norm -422
115 V AC 7/4 VA Form B industrial norm -426
230 V AC 7/4 VA Form B industrial norm -427
*1 Plug socket not included, suitable plug sockets see page 3.
3/2-Wege-Ventile
2
1 3
12
3 MN-22-311-HN-xxx
3/2-way, single solenoid, mechanical
spring return, NC
02 Subject?to?change
Valves > standardized valves > electrically operated >
Series MN-22
NAMUR
Technical data
Dimensions
M-04-310-HN. MO-04-310-HN MN-22-51x-HN
210
40
36 ? 6.5
201
70
45
83
1 = pressure inlet
2,4 = outlets
3,5 = exhausts
36 36
Plug socket (not included in scope of delivery) can be repositioned
by 180°.
Solenoid coil can be repositioned by 4 x 90°.
5 1 3
4 2
Model-no.: MN-22-311 MN-22-510 MN-22-511
Operating pressure* (bar) 3 ... 10 1 ... 10 3 ... 10
Pilot pressure* (bar) 3 ... 10 1 ... 10 3 ... 10
Flow rate (Nl/min) 3300 3300 3300
Response time (ms)
at 6 bar
on: 28
off: 68
on: 30
off: 59
on: 20
off: 80
Weight (kg) 1.10 1.10 1.10
* max. 8 bar at 2.2 W and 2.5 W
M-04-310-HN, MO-04-310-HN MN-22-31x-HN
210
40
36 ? 6,5
201
70
45
83
1 = pressure inlet
2 = outlet
3 = exhaust
72
Plug socket (not included in scope of delivery) can be repositioned
by 180°.
Solenoid coil can be repositioned by 4 x 90°.
3 1
3 2
valves > electrically operatede valves >
Subject?to?change 03
Valves > electrically operated valves > accessories >
Plug sockets
Form B according to DIN EN 175301-803
Overall width 22 mm
Contact distance 10 mm
Contacts 2P + E
Protection IP 65 according to EN 60529 requires a flat gasket
For use with series
Model-no.: 28-ST-01-G
Voltage (AC/DC) 0 - 250 V
Status indicator no
Protective circuit no
Connecting cable without
Wire cross section max. 1.5 mm2
? Connecting cable 6 - 8 mm
Form B according to DIN EN 175301-803 Form B industrial norm
